How to Change Network Settings on HP Printer: Step-by-Step Guide
Changing the network settings on your HP printer is often necessary when you move to a new router, experience Wi‑Fi interference, or set up the device in a new office. Whether you use a wireless HP LaserJet or an all‑in‑One inkjet, the process usually involves accessing the printer’s Embedded Web Server (EWS) or using the built‑in menu system to update IP, DNS, and Wi‑Fi credentials. This guide walks you through each method clearly and safely.
How to Access Your HP Printer’s Network Settings
Before you change anything, you need to enter the printer’s network configuration interface. The most common approach is via the Embedded Web Server, which turns the printer into a small web page you can open on any computer connected to the same local network.
- Turn the printer on and make sure it is connected to the same network as your computer.
- Open a web browser such as Chrome, Edge, or Firefox.
- Type the printer’s IP address into the address bar and press Enter.
If you do not know the IP address, you can usually find it on the printer’s network summary page, on the embedded control panel, or by printing a network configuration report from the printer menu.
Finding the IP Address from the Printer Control Panel
All modern HP printers display network details directly on the screen. The exact path varies by model, but the pattern is similar across LaserJet and OfficeJet families.
- Press the Home or Menu button on the printer.
- Navigate to Settings or Network.
- Select Reports or Network Summary, then choose to print or view the current IP settings.
Once you have the address, type it into a browser to open the EWS dashboard, where you can adjust DNS, Wi‑Fi channels, SNMP settings, and port configurations.
Changing Wi‑Fi Settings on Wireless HP Printers
For wireless models, the network settings are mostly about which SSID to join and which security protocol to use. HP recommends using the Wireless Setup Wizard because it guides you through selecting the correct router and entering the password without typing it manually.
- From the printer control panel, open the Wireless or Network Settings menu.
- Start the Wireless Setup Wizard.
- Select your Wi‑Fi network from the list and enter the password when prompted.
- Choose WPA2 or WPA3 if you are asked about security type, matching what your router uses.
If your router uses a hidden SSID, you will need to enter the name exactly, including case sensitivity, and configure the security keys carefully. Double‑check for typos, because a single wrong character will prevent the printer from connecting.
Wired Network and IP Configuration Options
For offices that rely on Ethernet, static IP configuration can be helpful for consistent printing, especially when you want to use printer IP address monitoring or configure advanced port settings in Windows and macOS.
| Setting | DHCP (Automatic) | Static (Manual) |
|---|---|---|
| Best for | Home networks, easy plug‑and‑play | Business environments, server‑based monitoring |
| How to change | Ensure DHCP is selected in TCP/IP settings | Enter IP address, subnet mask, default gateway, and DNS manually |
To change these values, open the Embedded Web Server, go to the TCP/IP or Network Settings tab, and switch between DHCP and Manual. When using static IP, make sure the address falls within the same subnet as your router and that it is outside the DHCP range to avoid IP conflicts with other devices.
Troubleshooting Common Network Issues After Changes
Once you update network settings, the printer may fail to connect or appear offline. First, verify physical connectivity by checking Ethernet cables or ensuring the Wi‑Fi signal strength is sufficient. Use the printer control panel to run a network test or network configuration report to see where the breakdown occurs.
Common errors include incorrect gateway addresses, mismatched subnet masks, and DNS server failures. If the printer obtains an IP address starting with 169.254, it means the DHCP request failed and you should either restart your router or switch to a static IP. Updating router firmware and ensuring WPA settings match between the router and the printer also resolves many connectivity problems.
Security Considerations When Changing Network Settings
Every time you modify network settings on an HP printer, you potentially affect security and data privacy. Open ports, outdated firmware, or weak Wi‑Fi passwords can expose the device to unauthorized access on the network.
- Enable WPA3 or at least WPA2 on your router and printer.
- Change default SNMP community strings if you use SNMP monitoring.
- Keep the printer firmware up to date through the Embedded Web Server or HP Smart app.
- Disable unnecessary services such as WSD or external port 9100 if they are not required.
For regulated environments such as healthcare or finance, document every change, use static IPs only when necessary, and segment the printer onto a dedicated VLAN to reduce exposure to other devices on the corporate network.