How to Change Wheels in BeamNG: A Step-by-Step Guide
Swapping out wheels in BeamNG.drive is one of the most common modifications enthusiasts perform to tailor a vehicle’s behavior for specific scenarios. Whether you are trying to improve traction on icy roads, achieve a sleek lowrider aesthetic, or simply replace worn-out tires after a wild off-road session, understanding the underlying system is essential. This guide walks through the entire process, from locating the correct files to fine-tuning the physical properties of your new set of rims.
Before diving into the wheel changing process, it is important to recognize that BeamNG.drive treats wheels as a combination of visual assets and complex physical actors. Each vehicle relies on a configuration file that dictates the size, offset, and physical constraints of the tires. Ignoring these numerical boundaries while changing wheels can result in the rims clipping through the fenders or the suspension bottoming out far too easily. Therefore, successful modification is as much about data as it is about art.
Understanding the Vehicle Config File
Locating the Main Description File
Every vehicle in BeamNG.drive is defined by a folder containing a description.xml file, which acts as the brain of the machine. This file holds references to the visual model, the sounds, and the crucial wheel configurations. To change wheels effectively, you will need to access this XML document using a standard text editor to view the current wheel setup.
Key Parameters to Know
Within the description file, you will encounter specific tags such as wheelScale, wheelRadiusOffset, and suspensionMaxForce. The wheel scale determines the visual size of the rim, while the radius offset adjusts the vertical position of the tire relative to the hub. Suspension settings dictate how much force the shock absorbers can handle before failing, which is vital if you are increasing the weight of the wheel dramatically.
To ensure these values are correct, it is helpful to compare them against the default settings of a similar vehicle. If you are moving from a standard sedan wheel to a heavy-duty off-road tire, you will likely need to adjust the suspension stiffness and damping values to compensate for the added mass and altered center of gravity.
Step-by-Step Replacement Process
The actual act of changing wheels in the editor is straightforward, but the preparation required ensures the final result looks and drives correctly. Follow these steps to swap your hardware without breaking the simulation.
- Open the vehicle in the BeamNG Editor and pause the simulation.
- Navigate to the "Parts" menu and locate the current wheel assembly.
- Remove the existing wheel by selecting it and hitting the delete key, ensuring you detach the entire unit including the axle node.
- Access the "Workshop" or import the new wheel model if it is not already in your library.
- Position the new wheel precisely at the hub node, checking for alignment on all four corners.
- Test the suspension travel to ensure the new wheel does not intersect with the brake ducts or chassis.
Visual and Physical Alignment
Even with the correct config values, you might encounter a common issue where the wheel meshes float inside the rim or sink too deep into the hub. This visual misalignment usually stems from incorrect offset values or a mismatch in the scale of the asset. Adjusting the wheelRadiusOffset in small increments—usually in the range of 0.01 to 0.05—can pull the tire snugly into place without penetrating the chassis.
Furthermore, the physical bounds of the tire must be verified through in-game testing. Drive the vehicle slowly over uneven terrain to see if the suspension compresses too far. If the wheel appears to "sink" into the road, the suspension length or the tire’s physical radius likely needs to be increased. This step is critical for maintaining realistic handling dynamics rather than creating a vehicle that feels floaty or unstable.
Advanced Customization Tips
For users seeking to push beyond simple replacement, modifying the underlying constraints is possible. By editing the Axle properties, you can adjust the grip level and the rate at which the tire loses traction. This is particularly useful for simulating specific regional road conditions, such as adjusting tire friction for a desert rally versus a wet city street.
Another advanced technique involves the use of Skinned Mesh Modifiers (SMM) to dynamically adjust the wheel well clearance based on the suspension height. While this requires a deeper understanding of 3D modeling software like Blender, it allows for a perfect fit every time the suspension compresses, eliminating the need for constant manual tweaks in the XML file.
Troubleshooting Common Errors
Even experienced modders encounter errors when changing wheels. A frequent problem is the game crashing on load, which usually indicates that the mesh path in the description.xml is broken or the file format is incompatible. Always ensure the mesh is optimized for real-time rendering and that the polygon count is reasonable for the vehicle class.
If the vehicle behaves erratically—spinning out or refusing to steer—the issue is likely tied to the friction values or the center of mass shift caused by the new wheel's weight. Reverting to a simpler wheel temporarily can help isolate whether the problem is the asset itself or the configuration data attached to it.