Fix Brother Printer Not Printing in Color: Easy Troubleshooting Guide
Few things are more frustrating than watching a Brother printer stubbornly spit out blank pages while a color document waits on your screen. This usually points to a configuration or connectivity issue rather than a hardware failure, and the path to a full-color printout is often clearer than you might think. By systematically checking settings, cartridges, and drivers, you can restore vibrant, accurate color output without needing a service call.
Confirm Your Print Settings Are Color-Correct
The first place to look is within the application you are using to create the document. A simple dropdown menu might be silently redirecting your masterpiece to a grayscale printer queue.
Verify the Printer Driver Settings
Open your computer’s Devices and Printers window, right-click your Brother model, and select Printing Preferences. Navigate to the Paper/Quality or Features tab; look for an option labeled Color Mode, Print Color, or Color Type. Ensure it is set to Color or Vibrant Color, rather than Grayscale, Black & White, or Photo (Monochrome).
Check the Application’s Own Settings
Software like Adobe Illustrator or Microsoft Word often controls output independently. Open the Print Preview window and look for a Properties or Printer Attributes link. This will take you to the same driver settings mentioned above, but it is easy to miss if you are only looking at the main print dialog. Also, ensure the Color Handling setting is set to Application or Printer, and not Off, depending on your workflow.
Inspect The Ink Or Toner Cartridges
Brother color laser printers use Cyan, Magenta, Yellow, and sometimes White or Light Black cartridges. If one of these is missing, disabled, or incorrectly seated, the printer will default to monochrome output to conserve the remaining colors.
- Open the front cover or access panel and check the cartridge carousel. Each color cartridge should be snapped into place with the colored label facing outward.
- Gently nudge a cartridge to ensure it is seated firmly. A loose cartridge will prevent the printer from recognizing the color set.
- Check the Brother printer’s control panel or Embedded Web Server (EWS) for cartridge alerts. If a color cartridge is reported as empty or low, replace it promptly, as many printers refuse to print color if one color is depleted.
Update Or Reinstall The Printer Driver
Outdated or corrupted drivers are a frequent culprit behind a Brother printer that prints in black and white only. Manufacturers release updates that fix bugs related to color management and communication protocols.
Visit the official Brother support website, locate your exact model number, and download the latest Full Driver & Software Package. Uninstall the old driver through Control Panel > Programs and Features before installing the new one. During installation, allow the setup wizard to detect the connection automatically; manually selecting a port can sometimes strip away color configuration.
Verify The Connection And Network Settings
Wireless and USB connections can sometimes cause the printer to revert to a limited mode. If the printer is communicating but not sharing color data, the issue might be a fragmented data stream.
For USB connections, try replacing the cable or using a different port on your computer. For Wi-Fi or Ethernet, ensure the printer and computer are on the same subnet. A mismatch in network segments can cause the printer to operate in a degraded mode. Restarting both the printer and the router can clear temporary glitches that disrupt color data transmission.
Run The Brother Color Alignment Utility
Over time, even slight shifts in the paper feeder or print head can cause color registration issues or cause the printer to limit color usage to prevent smudging.
Access the Embedded Web Server by typing the printer’s IP address into a browser. Look for a Utilities or Maintenance tab and select Color Alignment or Calibration. Follow the on-screen prompts to print a test pattern and confirm the alignment. This process synchronizes the tiny nozzles or laser drums to ensure that cyan, magenta, and yellow layers overlap perfectly, restoring full-color fidelity.
Check For Grayscale Or Mono Mode Activation
Sometimes the toggle is right in front of you, hidden in a menu or accidentally enabled by a keyboard shortcut.
Examine the printer’s small LCD screen or control panel buttons for a symbol that resembles a half-filled circle or the letters “M/G.” This indicates Mono or Grayscale mode, which routes the job to a single black toner slot. Disabling this mode varies by model, but it is usually found in the Settings or Preferences menu under Output Options. Consulting the user manual for your specific Brother model will give you the exact steps to toggle this feature off.