How to Print Tarapapel on Brother Printer: Easy Guide
Printing directly on tarpaper with a Brother printer is a specific process that requires attention to detail regarding media type, print settings, and handling. This guide provides a clear, step-by-step walkthrough to achieve professional results without damaging your equipment.
Understanding Tarpaper and Printer Compatibility
Before beginning, it is essential to verify that your Brother printer is compatible with thick media like tarpaper. Tarpaper is a heavy, wax-infused sheet designed for construction and weatherproofing, making it significantly thicker than standard paper. Most consumer Brother inkjet models, such as the DCP and MFC series, can handle this material if the correct settings are selected, but laser printers are generally unsuitable due to the heat fusing process.
Check Your Model Specifications
Consult your printer’s user manual or the official Brother website to confirm the maximum media weight and type. Look for specifications regarding "thick paper" or "manual feed" capabilities. Attempting to print on material exceeding the printer’s weight limit can cause paper jams or damage the internal rollers.
Preparing the Tarpaper
The success of this task relies heavily on how the tarpaper is prepared. The surface must be clean, dry, and flat to ensure the ink adheres correctly and moves smoothly through the printer without curling or tearing.
- Cut the tarpaper to the exact size of the paper tray or the area of the printable media to prevent misfeeds.
- Wipe down the sheet with a dry cloth to remove any dust, dirt, or manufacturing residue.
- Avoid using wet cloths or cleaning solutions, as the wax coating can react poorly to moisture.
Adjusting Printer Settings
Accessing the printer driver settings is the most critical step. Brother printers offer specific media types in the print menu, and selecting the wrong one will result in poor ink distribution or a mechanical error.
| Setting Category | Recommended Setting for Tarpaper |
|---|---|
| Media Type | Heavyweight Paper or Manual Feed |
| Paper Source | Manual Feed Slot (if available) |
| Print Quality | Standard or Photo depending on opacity needed |
Loading the Tarpaper
Loading this material requires a different approach than loading standard copy paper. You cannot simply stack a ream of tarpaper in the tray; it must be fed individually to ensure smooth passage through the print head and exit rollers.
If your Brother printer has a manual feed tray, use it. This tray bypasses the delicate paper guides of the standard tray, reducing the risk of tearing. If a manual tray is not available, load a single sheet carefully into the main tray, ensuring it is positioned correctly and curled slightly in the direction of travel (usually face down).
Sending the Print Job
Once the printer is prepared, send your document or image from your computer. It is recommended to perform a test print on standard paper first to ensure the tarpaper path aligns correctly with the print head.
When printing, monitor the device closely. Listen for any unusual noises, such as grinding or excessive friction, which indicate the paper is too thick for the rollers. If the printer struggles to grab the sheet, stop the job immediately to prevent a jam that could pull the tarpaper deep into the mechanism.
Final Handling and Drying
Because tarpaper is coated, the ink does not dry instantly like it does on regular paper. Handling the sheet too early can result in smudging or transferring the image to other surfaces.
Allow the printed sheet to sit flat in a dust-free environment for at least 24 hours. The wax coating on the tarpaper will repel moisture, so do not attempt to speed up the drying process with heat or fans, as this can cause the ink to crack. Once fully set, the print will be durable and resistant to handling.